 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : EN9084A 2SJ629 SANYO Semiconductors DATA SHEET P-Channel Silicon MOSFET 2SJ629 Features * * * General-Purpose Switching Device Applications Low ON-resistance. Ultrahigh-speed switching. 1.8V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (600mm2!0.8mm) Tc=25C Conditions Ratings --12 8 --4.5 --18 1.3 3.5 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss td(on) tr td(off) tf Conditions ID=--1mA, VGS=0V VDS=-12V, VGS=0V VGS=6.4V, VDS=0V VDS=-6V, ID=--1mA VDS=-6V, ID=--2.2A ID=--2.2A, VGS=-4.5V ID=--1.1A, VGS=-2.5V ID=--0.5A, VGS=-1.8V VDS=-6V, f=1MHz VDS=-6V, f=1MHz VDS=-6V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --12 --10 10 --0.3 3.4 5.7 75 110 150 450 100 85 15 140 58 52 98 155 225 --1.0 typ max Unit V A A V S m m m pF pF pF ns ns ns ns Marking : MC Continued on next page. Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82506 MS IM TC-00000118 / 82605PA MS IM TA-100585 No.9084-1/4 2SJ629 Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS=--6V, VGS=--4.5V, ID=-4.5A VDS=--6V, VGS=--4.5V, ID=-4.5A VDS=--6V, VGS=--4.5V, ID=-4.5A IS=--4.5A, VGS=0V Ratings min typ 6.5 0.8 2.0 --0.95 --1.5 max Unit nC nC nC V Package Dimensions unit : mm (typ) 7007A-003 Switching Time Test Circuit VIN Top View 4.5 1.6 1.5 PW=10s D.C.1% 2.5 1.0 4.0 VDD= --6V 0V --4.5V VIN ID= --2.2A RL=2.73 D VOUT G 1 0.4 0.5 1.5 2 3 0.4 P.G 50 2SJ629 S 3.0 0.75 1 : Gate 2 : Drain 3 : Source Bottom View SANYO : PCP --3.0 ID -- VDS 0V 5V --3 . --2 .5 V --3.0 ID -- VGS VDS= --6V --2.5 --2.5 Drain Current, ID -- A --3 . --4 .5 --2.0 Drain Current, ID -- A V 8 --1. V --2.0 --1.5 V --1.5 --1.5 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 IT04325 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 25 --1.4 VGS= --1.0V C --0.5 --0.5 Ta = 75 --1.0 --1.0 C --25 C --1.6 --1.8 Drain-to-Source Voltage, VDS -- V Gate-to-Source Voltage, VGS -- V IT04326 No.9084-2/4 2SJ629 250 RDS(on) -- VGS Ta=25C 300 RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 200 250 200 150 ID= --1.1A --2.2A 100 150 --0.5A I D= = --1 , VGS .8V 100 --4.5V A, V GS= I D= --2.2 .1 I D= --1 = --2.5 A, V GS V 50 50 0 0 --1 --2 --3 --4 --5 --6 --7 --8 0 --60 --40 --20 0 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V 3 yfs -- ID IT10073 --10 7 5 Ambient Temperature, Ta -- C IT10074 IS -- VSD VGS=0V Forward Transfer Admittance, yfs -- S VDS= --6V 2 10 7 5 3 2 25C Source Current, IS -- A 3 2 C --25 Ta= C 75 --1.0 7 5 5C 3 2 25C 7 5 --0.1 2 3 5 7 --1.0 2 3 5 7 --0.1 --0.4 --0.6 Ta= 7 1.0 --25C --0.8 --1.0 --1.2 IT04330 Drain Current, ID -- A 5 3 IT04329 1000 7 5 SW Time -- ID VDD= --6V VGS= --4.5V Ciss, Coss, Crss -- VDS f=1MHz Ciss Diode Forward Voltage, VSD -- V Switching Time, SW Time -- ns Ciss, Coss, Crss -- pF 2 tr 100 7 5 3 2 3 2 td(off) tf 100 7 5 Coss Crss td(on) 2 3 5 7 --1.0 2 3 5 7 10 --0.1 3 0 --2 --4 --6 --8 --10 --12 IT04332 Drain Current, ID -- A --4.5 --4.0 --3.5 IT04331 3 2 --10 7 5 VGS -- Qg VDS= --6V ID= --4.5A Drain-to-Source Voltage, VDS -- V ASO 10 Gate-to-Source Voltage, VGS -- V IDP= --18A ID= --4.5A 10 ms 10 0 s s 1m s Drain Current, ID -- A --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 1 2 3 4 5 6 7 IT10075 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 DC op 10 era 0m n s tio Operation in this area is limited by RDS(on). --0.01 --0.01 Tc=25C Single pulse 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Total Gate Charge, Qg -- nC Drain-to-Source Voltage, VDS -- V 5 7 --10 2 IT10076 No.9084-3/4 2SJ629 1.4 PD -- Ta Allowable Power Dissipation, PD -- W 4.0 3.5 3.0 PD -- Tc Allowable Power Dissipation, PD -- W 1.3 1.2 M ou 1.0 nt ed on ac 0.8 er am ic bo 0.6 ar 2.0 d (6 00 m 0.4 m2 ! 0. 8m 1.0 0.2 0 0 20 40 60 80 100 120 m ) 160 0 140 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT10077 Case Temperature, Ta -- C IT10072 Note on usage : Since the 2SJ629 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2006. Specifications and information herein are subject to change without notice. PS No.9084-4/4 |
Price & Availability of 2SJ629
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |